Rockwell Automation 1771-ID16 SERIES B Install Instr ac/dc (120V)Isolated Input - Manual (Page 7)

ac/dc (120V) Isolated Input Module 7
Publication 1771-IN070B-EN-P - August 2002
Swing thechassis locking bar down into placeto secure
themodules. Makesurethelocking pins engage.
1771ĆA1B, ĆA2B, ĆA3B, ĆA3B1, ĆA4B I/O chassis 1771ĆA1B, ĆA2B, ĆA3B1, ĆA4B Series B I/O chassis
locking tab
card guides
Module
Module
19809
card guides
locking bar
locking bar pin
Snap thechassis latch over
thetop of themoduleto secureit.
1
17643
wiring arm
install
remove
horizontal bar
Attach thewiring arm (1771ĆWN) to thehorizontal
bar at thebottom of theI/O chassis.
Thewiring arm pivots upward and connects with
themoduleso you can install or removethe
modulewithout disconnecting thewires.
1771ĆWN
2
The 1771–ID16/B module is a modular component of the 1771 I/O
system requiring a properly installed system chassis. Refer to
publication 1771–IN075 for detailed information on acceptable
chassis, proper installation and grounding requirements. Limit the
maximum adjacent slot power dissipation to 10W maximum.