Rockwell Automation 1756-HIST2G FactoryTalk Historian ME 2.1 Installation Instructions User Manual
Factorytalk historian machine edition module, Installation instructions
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- FactoryTalk Historian Machine Edition Module
- Environment and Enclosure Information
- Prevent Electrostatic Discharge Information
- Removal and Insertion Under Power (RIUP) Capability
- Ethernet Network Communications Connections
- North American Hazardous Location Approval
- Identify FactoryTalk Historian ME Module Components
- Prepare the Chassis for Module Installation
- Determine Module Slot Location
- Install the Module in the Chassis
- Remove or Replace the Module (when applicable)
- Install or Remove the Module Under Power
- Wire the Ethernet Connector
- Connect the Module to the Ethernet Network
- Apply Chassis Power
- Check Power Supply and Module Status
- Port (Ethernet) LED Information
- Where to Find Information on Configuring the Module
- How to Upgrade and Reinstall the Firmware
- Specifications