Rockwell Automation 1746-XXXX SLC 500 4-Channel Analog I/O Modules User Manual - Manual (Page 110)

Publication 1746-UM005B-EN-P - June 2004
2 Index
Positive Decimal Values A-1
power requirements for a fixed
controller 3-2
power requirements for a modular
controller 3-2
PowerUp the SLC 500 System 5-3
Processor Update of Analog Data 4-5
publications, related P-2
Q
Quick Start for Experienced Users 2-1
R
related publications P-2
Required Tools and Equipment 2-1
Response to Slot Disable 4-13
Retentive Programming Option 4-9
S
Scaling and Range Checking of Analog
Inputs and Outputs
Calculating the Linear Relationship 6-21
Using SCL Instruction 6-25
Using Standard Math Instructions 6-22
Using the Scale with Parameters (SCP)
Instruction 6-26
Scaling Offset when >32,767 or 32,768
Calculating the Linear Relationship 6-14
Calculating the Linear Shifted
Relationship 6-15
Using Standard Math 6-16
Using the Scale with Parameters (SCP)
Instruction 6-18
startup instructions 2-1
system start-up procedures 5-1
T
terminal block
removing 3-7
Testing Analog Inputs 5-4
Testing Analog Outputs 5-6
Testing the SLC 500 System 5-1
tools needed 2-1
Two’s Complement Binary Numbers
Positive Decimal Values A-1, A-2
V
Voltage Output Circuit for 1746NIO4V
Modules A-1
W
Wiring Considerations
Grounding Your Cable 3-9