Rockwell Automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE - Manual (Page 39)

1785-6.5.19 November 1998
Communicating via the Interface Module 4-9
Identifying the Interface Module
within a Network The PLC-5 Ethernet Interface Module supports the Simple Network
Management Protocol (SNMP).
The module responds automatically to SNMP requests and maintains
a Management Information Base (MIB) file (Level II). Information
kept in this file could include for example:
• number of datagrams received
• number of fragmented packets received
• maximum number of TCP connections allowed
See Appendix C for more details.
Saving and Restoring Programs You can physically and logically save and restore all programs,
provided you are using:
• any release of RSLogix 5 programming software
• AI Programming Software, release 7.21 or later, for all logical
saves/restores
• 6200 Series Programming Software, release 5.2 or later, for all
logical saves/restores
• an enhanced PLC-5 processor, series B or later