Rockwell Automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE - Manual (Page 9)

1785-6.5.19 November 1998
Chapter
1
Quick Start
This chapter can help you get started quickly using the PLC-5
Ethernet Interface Module. We base the procedures here on the
assumption that you have an understanding of:
• PLC-5 products
• TCP/IP protocol
• Internet addressing
Because this is a quick start guide for experienced users, this chapter
does not contain detailed explanations about the procedures listed. It
does, however, reference other chapters in this book where you can
get more information.
If you have any questions or are unfamiliar with the terms used or
concepts presented in the procedural steps, always read the
referenced chapters and other recommended documentation before
trying to apply the information.
This chapter:
• tells you what equipment you must provide for installing the
Ethernet interface module
• helps you install and configure the module
• helps you connect to an Ethernet link and communicate via the
interface module
20611±M
Status
indicator
External
transceiver
fuse
Transmit
indicator
Channel 3A:
15-pin AUI
connector port