Rockwell Automation 1756-EN2TXT ControlLogix-XT EtherNet/IP Bridge Module - Manual (Page 15)

ControlLogix-XT EtherNet/IP Bridge Module 15
Publication 1756-IN635A-EN-P - March 2009
Apply Chassis Power
Apply power to the ControlLogix-XT power supply to supply power
to the EtherNet/IP module installed in the chassis.
Check Power Supply and Module Status
After power is applied, check the:
• power supply status indicator.
• module status indicators.
• module alphanumeric display.
These indicators indicate if the module is operating properly.
Use these sections as references when checking the status:
• Alphanumeric Display Start-up Indications, on page 16
• Status Indicators, page 18
Power Supply
Status
Alphanumeric
Status Indicator
Module Status
Indicators