Rockwell Automation 1771-IAN 120V Input Module Installation Instructions - Manual (Page 4)

AC (120V) Input Module 4
Publication 1771-IN032B-EN-P - July 2002
!
ATTENTION
Preventing Electrostatic Discharge
This equipment is sensitive to electrostatic
discharge, which can cause internal damage and
affect normal operation. Follow these guidelines
when you handle this equipment:
•
Touch a grounded object to discharge potential
static.
•
Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on component
boards.
•
Do not touch circuit components inside the
equipment.
•
If available, use a static–safe workstation.
•
When not in use, keep modules in appropriate
static–safe packaging.
The 1771–IAN ac input module is a sink input and requires a source
output. A sink input provides a path to ground and a source output
provides a positive voltage path.
You must use this module in a series B 1771 I/O chassis. Refer to the
table below for processor compatibility.
Processor Compatibility Chart
System Type Use with Processors:
Local Mini-PLC-2/02 (cat. no. 1772-LZ, -LZP)
Mini-PLC-2/16 (cat. no. 1772-LX, -LXP)
Mini-PLC-2/17 (cat. no. 1772-LW, -LWP)
PLC-5/15, Series B andlater (cat. no. 1785-LT)
Remote (with a 1771-ASB
remote I/O adapter)
PLC-2/20 (cat. no. 1772-LP2)
PLC-2/30 (cat. no. 1772-LP3)
PLC-3 (cat. no. 1775-L1, -L2, -L3, -L4)
PLC-3/10 (cat. no. 1775-LP4, -LP8)
PLC-5/15, Series B andlater (cat. no. 1785-LT)
WARNING
!
When used in a Class I, Division 2, hazardous
location, this equipment must be mounted in a
suitable enclosure with proper wiring method that
complies with the governing electrical codes.
Do not place this module in the same I/O chassis as the 1771–IX
thermocouple module. You can use this module in the same chassis
as the 1771–IXE thermocouple module.
Pre-installation
Considerations