Rockwell Automation 1792D-8BT0LP ArmorBlock LP2 8 Sinking Input Module - Manual (Page 5)

ArmorBlock LP2 8 Sinking Input Module 5
Publication 1792D-5.47 - August 1999
Input connectors for this module are shown below.
Communicate with Your ArmorBlock LP2 Module
This ArmorBlock module’s I/O is exchanged with the master through a
poll, change of state, or cyclic connection.
The module produces input data as follows:
Cyclic - allows configuration of the block as an I/O client. The block will
produce its I/O cyclically at the rate configured.
Polled - a master initiates communication by sending its polled I/O
message to the module. The 8 input module consumes the message,
updates inputs, and producing a response. The response has input data and
input faults.
Type of I/O Connections Consumes Produces
Cyclic 0 Bytes 2 Bytes
Polled 0 Bytes 2 Bytes
Change of State 0 Bytes 2 Bytes
I-0
I-1
I-2
I-3
I-7
I-6
I-5
I-4
Network Status Module Status
42041
Input 0
Input 1
Input 2
Input 3
Input 5
Input 4
Input 7
Input 6
Connector A
Connector B
Connector C
Connector D