Rockwell Automation 1792D-12BT4PE ArmorBlock MaXum 12 In/4 Out Module with Ground Lug - Manual

Publication 1792D-IN056A-EN-P - October 2004
Installation Instructions
ArmorBlock MaXum 12 Input/
4 Output Module With Ground Lug
Cat. No. 1792D-12BT4PE
This ArmorBlock MaXum I/O module (Cat. No. 1792D-12BT4PE) is
a stand-alone 24V dc I/O product, which communicates via a
DeviceNet network. The sealed housing of this module requires no
enclosure.
This module has 12 inputs and 4 outputs accessed through Y splitter
cables. Inputs are 24V dc devices. Four self-protected 24V dc outputs
can provide up to 2.0 amp each. Diagnostic features are short circuit,
open wire and no load detection reported to the connector level for
inputs and to point level for outputs. Local logic control has been
included.
An external lug exists to ground the block
.
43881
Ground lug