Rockwell Automation 1792D-12BT4PE ArmorBlock MaXum 12 In/4 Out Module with Ground Lug - Manual (Page 12)

12 ArmorBlock MaXum 12 Input/ 4 Output Module With Ground Lug
Publication 1792D-IN056A-EN-P - October 2004
Byte Bit Description
Produces 0 00-07 Input Status bits: When the bit is set (1), the input is on.
Bit 00 = input 0, bit 01 = input 1, bit 02 = input 2, and so on to
bit 07 = input 7.
Produces 1 00-03
04-07
Input Status bits: When the bit is set (1), the input is on.
Bit 08 = input 8, bit 09 = input 9, bit 010 = input 10,
bit 011 = input 11.
Input short circuit fault (ISC): ISC-A indicates a short circuit
fault for connector A.
Input short circuit fault (ISC): ISC-B indicates a short circuit
fault for connector B.
Input short circuit fault (ISC): ISC-C indicates a short circuit
fault for connector C.
Input short circuit fault (ISC): ISC-D indicates a short circuit
fault for connector D.
Produces 2 00-01
02-07
Input short circuit fault (ISC): ISC-E indicates a short circuit
fault for connector E.
Input short circuit fault (ISC): ISC-F indicates a short circuit
fault for connector F.
Input off wire fault (OW): OW-A indicates an off-wire fault for
connector A.
Input off wire fault (OW): OW-B indicates an off-wire fault for
connector B.
Input off wire fault (OW): OW-C indicates an off-wire fault for
connector C.
Input off wire fault (OW): OW-D indicates an off-wire fault for
connector D.
Input off wire fault (OW): OW-E indicates an off-wire fault for
connector E.
Input off wire fault (OW): OW-F indicates an off-wire fault for
connector F.
Produces 3 00-03
06
04, 05, 07
Output no load or overload fault (OFLT): - When the bit is set
(1) an output fault has occurred. OFLT0 corresponds to output
0, OFLT1 corresponds to output 1, OFLT2 corresponds to output
2, OFLT3 corresponds to output 3
Output Power Fault (OPWR): When the bit is set (1) auxiliary
power is not present.
RSVD = Reserved
Consumes 0 00-03
04-07
Output bits: When the bit is set (1), the output will be turned
on. Bit 00 corresponds to output O0, bit 01 corresponds to
output O1, bit 02 to output O2, bit O3 to output 03.
RSVD = Reserved