Rockwell Automation Arena Users Guide - Manual (Page 146)

A RENA U SER ’ S G UIDE
138
• •
•
•
•
If multiple problems are detected, each will be listed with a description and, in the case of
invalid or missing properties, the field and value that are improper are listed. To correct
the errors in your drawing, you can use the buttons at the bottom of the dialog box. For
errors in shape properties, click the Edit Properties button, which displays the shape’s
dialog box, to correct the data. In the case of connector problems, click Go to Shape,
which displays and selects the shape that caused the problem, as shown below. (Note that
the Error Listing dialog box shrinks to allow more room for viewing the drawing.)
After you’ve corrected the problem, you can return to the list of errors/warnings by click-
ing the Return to Error List button. Once you finish correcting any additional problems,
click the Close button. You can check your drawing at any time, correcting any or all
errors that are detected.
Transfer the drawing to Arena
When you’re ready to simulate your process, it’s a simple matter of selecting the Simulate
Drawing item from the Simulate menu. This tool opens Arena and translates your Visio