Rockwell Automation Arena Users Guide - Manual (Page 22)

A RENA U SER ’ S G UIDE
14
• •
•
•
•
For our Review Application process, we’ll use a minimum time of 1 hour, most likely
value of 1.75 hours, and a maximum of 3 hours. We will assign a resource, the Mortgage
Review Clerk, to perform this process.
1. Double-click the Process module to open its property dialog box.
2. In the Name field, type Review Application.
3. To define a resource to perform this process, pull down the Action list and select Seize
Delay Release.
Arriving entities will wait their turn for the resource to be available. When its turn
comes, the entity will seize the resource, delay for the process time, and then release
the resource to do other work.
4. A list of resources will appear in the center of the dialog box. To add a resource for
this process, click Add.
If more than one
resource is required
for a process to be
performed, add as
many as are
necessary in the
Process dialog’s
Resources list. An
entity won’t
commence its
process delay until
all listed resources
are available.