Rockwell Automation 2706-LV2S_LV4S DL40 PLUS SLAVE USER MANUAL - Manual (Page 10)

Publication 2706.6.3
Chapter
1
Introduction to the DL40 Plus Slave
Chapter Objectives
This chapter describes the DL40 Plus Slave display and summarizes
its capabilities. The following topics are included in this chapter:
• DL40 Plus Slave description
• Operating modes
• Features
• Typical configurations
Description
The DL40 Plus Slave displays are available in two-line and four-line
versions. These displays are designed for panel mounting in industrial
environments and require a 110-240V AC power source.
DL40 Plus Slave displays receive message text from a host device.
The host device may be a DL40 Plus master display, PanelView
terminal, programmable controller, or a personal computer. All
messages are created and stored in the host device.
The DL40 Plus Slave displays appear similar to the standard DL40
Plus two and four-line displays except they do not have front panel
buttons, indicator LEDs, keyboard port, or an RIO / parallel port.
2706-LV4S
2706-LV2S