Typical configurations, Typical configurations -4, Dl40 plus to dl40 plus slave -4 – Rockwell Automation 2706-LV2S_LV4S DL40 PLUS SLAVE USER MANUAL User Manual
Page 13: Panelview to dl40 plus slave -4, Plc, pc, or other device to dl40 plus slave -4
Pu
blica
tion 2706-6.3
1-4
Introduction to the DL40 Plus Slave
Typical Configurations
Here are some of the most typical applications:
DL40 Plus to DL40 Plus Slave
PanelView to DL40 Plus Slave
PLC, PC, or Other Device to DL40 Plus Slave
DL40 Plus (Master)
DL40 Plus Slave
DL40 Plus Slave
CHECK PRESS #1
PRESS #1 STOPPED
SYSTEM CHECK
NORMAL
RS-485(multidrop)
RS-232 (point-to-point)
Host Controller or Personal Computer
Triggering Messages
RS-485(multidrop)
Other Slaves
Other Slaves
DL40 Plus Slave
INLET VALVE CLOSED
RS-232
Printer Port
One Slave Only
(Not Individually Addressable)
12:48 09/16/98
DL40 Plus Slave
DL40 Plus Slave
RS-232 (point-to-point)
RS-485(multidrop)
PLC, Personal Computer,
or other device providing
ASCII message packets
Alarm Reset
6:40 AM 11/17/98
Tank Temperature:
150 F
Other Slaves
Other Slaves