Rockwell Automation 2711C-xxxx PanelView Component HMI Terminals Quick Start - Manual (Page 73)

Publication 2711C-QS001F-EN-P - November 2010 73
Create the Motor Speed Screen Chapter 7
Create a New Screen
1. Click the Add button in the
Screen List to add a new
screen.
Screen 2 is added to the list
with a default name.
2. On the Screen tab of the
Properties panel, change the
Horizontal and Vertical Grid
Spacing from 10 to 5 and
press Enter.
The screen grid is
updated.
3. Open the Common tab of
the Properties panel.
4. In the Name box, type
MOTOR SPEED and press
Enter.
The name appears in the
Screen List and above the
screen workspace.