Additional resources – Rockwell Automation 2711P-RY2032 Battery Replacement Installation Instructions User Manual

Page 9

Advertising
background image

Battery Replacement 9

Rockwell Automation Rockwell Automation Publication 2711P-IN009F-EN-P - July 2014

4. Insert the new battery at an angle under the metal latch, with the positive polarity (+)

facing up.

5. Gently press down on the opposite side of the battery until it locks into place.

6. Replace the battery cover by aligning its tabs with the battery opening and rotate the

cover from the O(pen) to C(lose) position.

Additional Resources

These documents contain additional information concerning related products from Rockwell
Automation.

You can view or download publications at

http://www.rockwellautomation.com/literature/

. To

order paper copies of technical documentation, contact your local Allen-Bradley® distributor or
Rockwell Automation sales representative.

IMPORTANT

Make sure that the battery is fully inserted under the plastic tabs. If this is not done, damage can occur, and this
voids the warranty.

Resource

Description

PanelView Plus 7 Standard Terminals User Manual,
publication

2711P-UM007

Provides information on how to install, operate, configure, and
troubleshoot PanelView Plus 7 Standard terminals.

PanelView Plus 6 Terminals User Manual,
publication

2711P-UM006

Provides information on how to install, operate, configure, and
troubleshoot PanelView Plus 6 terminals (700, 1000, 1250, 1500) running
FactoryTalk View Machine Edition firmware revision 6.0 or later.

PanelView Plus Terminals User Manual, publication

2711P-UM001

Provides information on how to install, operate, configure, and
troubleshoot PanelView Plus 700, 1000, 1250, and 1500 terminals running
FactoryTalk View Machine Edition firmware revision 5.1 or earlier.

PanelView Plus Compact Terminals User Manual,
publication

2711PC-UM001

Provides information on how to install, operate, configure, and
troubleshoot PanelView Plus Compact terminals.

PanelView Component Terminals User Manual,
publication

2711C-UM001

Provides information on how to install, operate, configure, and
troubleshoot PanelView Component terminals.

Guidelines for Handling Lithium Batteries,
publication

AG-5.4

Provides safety information on the handling of lithium batteries, including
handling and disposing of leaking batteries

Advertising