Before you begin, Parts list, Required tools – Rockwell Automation 6180P-xxxx Integrated Display Computers with Keypad Installation Instructions User Manual
Page 5: Install the computer
Industrial Integrated Display Computers with Keypad 5
Rockwell Automation Publication 6180P-IN001C-EN-P - July 2013
Before You Begin
Before unpacking the product, inspect the shipping carton for damage. If damage is visible,
immediately contact the shipper and request assistance. Otherwise, proceed with unpacking.
Keep the original packing material in case you need to return the product for repair or transport
it to another location. Use both the inner and outer packing cartons to ensure adequate
protection for a unit returned for service.
Parts List
Your computer is shipped with these items:
•
Mounting hardware specific to each product
•
Power cord, AC (IEC320-13, AC power option only)
•
Ground bus strip (DC power option only)
•
Panel mount clips (10)
•
Panel cut-out template
•
Keys for front-panel access door
•
Installation instructions
•
System CDs
–
Accessory CD with Cloning Utility (red)
–
DVD-burning software (performance models only, CD format)
Required Tools
The following tools are required for product installation:
•
Panel cut-out tools
•
#2 Phillips screwdriver
•
Antistatic wrist strap (recommended)
Install the Computer
The 1200P and 1500P models of the display computer are installed in a panel. Before
installation, review the following information:
•
Mounting clearances
•
Panel mounting guidelines
•
Panel cutout dimensions
•
Product dimensions