Rockwell Automation 6189V-SLDUAL Optical Disc Drive (ODD) - Manual (Page 11)

Optical Disc Drive (ODD) 11
Publication 6177R-IN004B-EN-P - November 2009
Post-installation Procedure
Perform this post-installation procedure after installing or removing a hardware component.
1. Make sure all components are installed according to the step-by-step instructions.
2. Make sure that no loose tools or parts are left inside the computer.
3. Reinstall any expansion boards, peripherals, board covers, and system cables that have
been previously removed.
4. Reinstall the side cover, if necessary.
5. Connect all external cables and power to the computer.
6. Press the power switch to turn on the computer.
Additional Resources
For additional information on the VersaView Light Industrial Non-display computers, refer
to these publications.
You can view or download publications at http://literature.rockwellautomation.com. To
order paper copies of technical documentation, contact your local Rockwell Automation
distributor or sales representative.
Resource Description
VersaView Light Industrial
Non-display Computers User
Manual, publication
6177R-UM001 Gives an overview of the system and
provides procedures to install the computer,
set up computer connections, operate the
computer, and troubleshoot the computer.
VersaView Light Industrial
Non-display Computers
Installation Instructions,
publication 6177R-IN001 Provides pre-installation instructions and
procedures to machine/wall mount the 750R
computer and rack mount the 1450R
computer. It also describes how to make
peripheral, power, and network connections.