Rockwell Automation 6189V-SLDUAL Optical Disc Drive (ODD) - Manual (Page 8)

8 Optical Disc Drive (ODD)
Publication 6177R-IN004B-EN-P - November 2009
d. Detach the ODD module from its carrier.
5. Remove the new ODD module from its protective packaging.
6. Install the new ODD module to its carrier.
a. Lay the ODD module on its carrier.
b. Attach the ODD backplane board to the new ODD module.
c. Secure the ODD backplane board with the two screws you removed in step 3-b.
d. Secure the new ODD module using the four screws (M2x2.5) supplied with the
accessory kit.
The original screws you removed in step 3-a may not be compatible with your new
ODD.
7. Install the new ODD assembly on the system drive cage.
a
a
a
a
b
b c
d
a
b c
c
d
d
d
d