Rockwell Automation 6158 Industrial 21 inch CRT Monitors - Manual (Page 14)

14 Industrial 21" CRT Monitor
Publication 6158-5.0
process and creates a special directory on the hard disk to hold the touch
software. The user may specify a directory path name; otherwise, a
default path name is used. In addition, the utility modifies the system
startup files appropriately.
Touchscreen Calibration
After installing the driver software, follow the instructions in the
manufacturer’s documentation provided with the touch system.
ATTENTION: The calibration of the touchscreen will be
invalidated by any subsequent adjustment of the display
size or position. Insure that the display is properly
adjusted before beginning calibration.
When the touch system is to be used with multiple
applications, and these applications use different video
display modes, the calibration procedure should be
repeated for each mode that is to be used.
Using the Touchscreen with Application Programs
Following the installation of the touch software and calibration, the
touchscreen is ready to use.
Since, in general, the touchscreen emulates a mouse, compatibility issues
can arise in relation to the way the touchscreen emulates mouse buttons,
especially multiple buttons. For a complete discussion of these issues,
and means of resolving problems, see the relevant sections of the
manufacturer’s documentation.
Polycarbonate Window Option
A polycarbonate window option (6158-xxYxxxxxx) is available for
applications that require an added measure of protection for the monitor
screen.