Rockwell Automation 6158 Industrial 21 inch CRT Monitors - Manual (Page 3)

Industrial 21" CRT Monitor 3
Publication 6158-5.0
,QGXVWULDO ,QGXVWULDO  &57 0RQLW  &57 0RQLWRRUU
The Bulletin 6158 21" Industrial CRT Monitor is a general purpose
monitor suitable for a wide range of industrial computing applications.
ATTENTION: The equipment described in this
document generates, uses, and emits radio frequency
energy. The equipment has been tested and found to
comply with FCC Rules, Part 15, subpart J, for Class A
computing devices.
The use of non-shielded interface or power cords with
Allen-Bradley industrial monitors is prohibited.
ATTENTION: X-ray emissions from these monitors are
typically about 0.05 mR/hr maximum, well below the 0.5
mR/hr maximum recommended by the US. Department of
Health and Human Resources and specified in "Federal
Performance Standards for Television Receivers", Section
10, Part 1020, Title 21, of the U. S. Code of Regulation
(PL90-620), Vol. 38, No. 198.
These monitors are equipped with X-ray protection
circuits which cause automatic shutdown of the
equipment in case its X-ray emissions begin to approach
Federal limits.
Description