Rockwell Automation 1799-D10U10VZC Zone Control I/O Cards User Manual
Page 21
Zone Control I/O Cards 21
Publication 1799-IN007D-EN-P - October 2005
10 Input/10 Output Card-Cat. Nos. 1799-ZCIOB, 1799-D10U10BZC, 1799-ZCIOV, &
1799-D10U10VZC
General Specifications (continued)
DeviceNet Power: Voltage
Current
25V dc max
125 mA max
11V dc min
-
DeviceNet Power
Circuit Type
Class 2
Auxiliary Power:
Voltage
Current
30V dc max
4.0 A min (all outputs on)
10V dc min
100 mA min
(All Outputs Off)
Auxiliary Supply Power
Rating
Isolated outputs limited to 200VA in each ungrounded output
line
Isolation Voltage
(Continuous-voltage
Withstand Rating)
Tested to withstand 1000V dc for 60 s
Conductors Wire Size
DeviceNet power: 0.25...2.5 mm
2
(22...14 AWG) solid or
stranded copper wire rated at 75
o
C or greater.
Auxiliary power: 0.80...2.5 mm
2
(18...14 AWG) solid or
stranded copper wire rated at 75
o
C or greater.
DeviceNet: 0.25...2.5 mm
2
(22...14 AWG) solid or stranded
copper wire rated at 75
o
C or greater.
(See publication DNET-UM072)
I/O: 0.13...0.5 mm
2
(26...20 AWG) solid or stranded copper
wire rated at 75
o
C or greater.
Wiring Category
(1)
1 - on signal ports
1 - on power ports
2 - on communications ports