Rockwell Automation 1799-D10U10VZC Zone Control I/O Cards - Manual (Page 22)

22 Zone Control I/O Cards
Publication 1799-IN007D-EN-P - October 2005
RSNetWorx for DeviceNet and DeviceLogix are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
10 Input/10 Output Card-Cat. Nos. 1799-ZCIOB, 1799-D10U10BZC, 1799-ZCIOV, &
1799-D10U10VZC
General Specifications (continued)
Certifications (2)
(When product is marked)
c-UR-us UL Recognized Component Industrial Control
Equipment, certified for US and Canada
CE European Union 89/336/EEC EMC Directive,
compliant with:
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab., Industrial
Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6.4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8,
Zone A & B)
C-Tick Australian Radiocommunications Act, compliant
with: AS/NZS CISPR 11; Industrial Emissions
ODVA ODVA conformance tested to DeviceNet
specifications
Note: In order to comply with CE Low Voltage Directives (LVD), you must use either a NEC
Class 2, a Safety Extra Low Voltage (SELV) or a Protected Extra Low Voltage (PELV) power
supply to power this adapter. A SELV supply cannot exceed 30V rms, 42.4V peak or 60V dc
under normal conditions and under single fault conditions. A PELV supply has the same
rating and is connected to protected earth.
(1) Use this Conductor Category information for planning conductor routing. Refer to Publication
1770-4.1, "Industrial Automation Wiring and Grounding Guidelines".
(2) See the Product Certification link at www.ab.com for Declarations of Conformity, Certificates, and
other certification details.