Rockwell Automation 2755 AdaptaScan Mounting Bracket Kit - Manual (Page 2)

Catalog Number 2755-NM42
Instructions
AdaptaScan Mounting Bracket
2
The mounting bracket is attached to a mounting surface using three screws
(1/4 inch or M6).
ЙЙЙЙЙЙЙЙЙЙЙЙЙЙЙ
ЙЙЙЙЙЙЙЙЙЙЙЙЙЙЙ
Mounting Surface
The mounting holes for the bracket consist of 3 holes spaced 120
_ apart on
on 4 5/16 inch (109.54 mm) diameter pattern.
120
_ 120 _
4–5/16 inch (109.54 mm)
Diameter Bolt Pattern
3 Bolt Holes
120
_ Apart
Installing the
Mounting Bracket