Rockwell Automation 2755 AdaptaScan Mounting Bracket Kit - Manual (Page 5)

Catalog No. 2755-NM42
Instructions
AdaptaScan Mounting Bracket
5
Side Post Mounting
The mounting plate attaches to the bottom of the wiring base with three
screws that are provided with the base. The mounting bracket post (flat side)
attaches to the mounting plate with two hex socket screws. 5 sets of 2 holes
allow the bracket post to attach to the front, back or either side of the
mounting plate. Lock the bracket in position by tightening the locking knob.
For additional security, you can remove the locking knob and replace it with
the hex bolt provided.
Mounting Plate to Reader Screws
Mounting Plate
Bracket to Mounting Plate Screws
Adjustable Mounting Bracket
(1/4 – 20 x .5 Hex Socket)
Bracket Locking Knob or
Bolt (5/16 x 1 inch)
3 Mounting Holes
(9/32 inch diameter)
Use 3/16 inch Hex Wrench
Screws Provided Catalog No.
(3) #10-32 x 1/2 Inch 2755-NB40
(3) M5 -.8 x 16mm 2755-NB41