Rockwell Automation 61C615 RTD Termination Panel - Manual (Page 17)

AĆ1
Appendix A
Technical Specifications
Ambient Conditions
D Storage temperature: Ć40_C Ć 85_C
D Operating temperature: 0_C Ć 55_C
D Humidity: 5Ć90% nonĆcondensing
Dimensions
D Height: 1.7 inches
D Width: 19.0 inches
D Depth: 1.6 inches behind rack rails
2.5 inches in front of rack rails
Input Circuit
D Number of inputs: 16
D Type: 100 ohm (@ 0 degrees C) platinum RTD
D Resistance curve: European. Alpha = 0.00385 ohms/ohm/deg. C
D Isolation: All channels on panel have a common ground. Entire panel
may operate at nonĆzero common mode voltage
depending on input board common mode range and
power supply isolation.
D Connections: ScrewĆactivated, clamp type barrier strips. Accomodates 24
to 14 AWG wire. Four connections/RTD.
Output Circuit
D Linearized range: -20 to +250 deg. C
D Sensitivity: .5mVolt/deg. C
D Zero point: 0 deg. C
D Linearization error
for 0.1 ohm lead resistance: <0.1 deg. C (Ć20 to 250 deg.C)
for 0.1 to 0.2 ohm resistance:<0.1% reading + 0.1 deg. C
(-20 to 250 deg. C)
or
<.25 deg. C (-20 to 200 deg. C)
D Temperature variation (0Ć55 deg. C): 0.5% of reading, 0.2mVolts max
D Connections: 50 wire twisted pair flat cable per 8 channels, 6 ft long. One
end hardwired into panel; other end terminated in a
connector (3M part no. 3425Ć6050).