Rockwell Automation 2706-PENI_PDNI InView EtherNet/IP Module and InView DeviceNet Module Install Inst - Manual (Page 3)

3 Publication 2706-IN010C-MU-P
Installation Instructions
English Section InView EtherNet/IP Module
(Catalog Number 2706-PENI)
InView DeviceNet Module
(Catalog Number 2706-PDNI)
ENI Port Identification
PENI Specifications
ETHERNET
FAULT
RS232
NET
TX/RX TX/RX
PWR
CABLE
EXTERNAL
IP
Use this write-on area to mark
the Ethernet IP address
RS-232 Mini-DIN (ENI Port 2)
Ethernet Port (ENI Port 1)
Power Source Switch -
(Set to EXTERNAL)
Description ENI Specification
24V dc Power Source Requirement 20.4 to 26.4V dc
24V dc Current Draw 50 mA typical, 100 mA maximum
Maximum Inrush Current 200 mA
Internal Isolation 500V ac for one minute
Operating Ambient Temperature 0
°
C to +50
°
C (+32
°
F to +122
°
F)
Storage Temperature -40
°
C to +85
°
C (-40
°
F to +185
°
F)