Rockwell Automation 2706-PENI_PDNI InView EtherNet/IP Module and InView DeviceNet Module Install Inst - Manual (Page 4)

Publication 2706-IN010C-MU-P
4 InView EtherNet/DeviceNet Module
DNI Port Identification
PDNI Specifications
External Power Supply
Wiring
NODE
DANGER
GND
TX/RX
V±
CAN_L
SHIELD
CAN_H
V+
NET
MOD
DeviceNet Port (Port
1) (Replacement
connector part no.
1761-RPL-RT00)
Use this write-on
area to mark the
DeviceNet node
address.
RS-232 Mini-DIN (DNI Port 2)
Description DNI Specification
24V dc Power Source
Requirement 11 to 25 V dc
Current Draw 200 mA typical
400 mA maximum inrush current
Internal Isolation 500V dc
Operating Ambient Temperature 0 to +50
°
C (+32
°
F to +122
°
F)
Storage Temperature -40 to +85
°
C (-40
°
F to +185
°
F)
IMPORTANT
•
The PDNI module is powered by the
DeviceNet network power supply.
•
The PENI module requires an external 24V dc
power supply.
•
Set power source switch to the EXTERNAL
position.
VDC
24
DC
NEUT
CHS
GND
Bottom View
ENI only