Rockwell Automation 1797-CEC FLEX Ex Bus Isolator and Flexbus Connector - Manual (Page 6)

6 FLEX Ex Bus Isolator and Flexbus Connector
Publication 1797-5.13 - June 2010
1797-CEC Module Installation
The 1797-CEC module mounts on a DIN rail. It connects to an adapter or
another FLEX I/O module. If using this module with FLEX I/O modules,
do not mount between FLEX I/O modules. Mount the 1797-CEC module to
the right of FLEX I/O modules. Follow these steps to mount this module.
1. Remove the cover plug (if used) in the male connector of the unit to
which you are connecting this module.
2. Position the module on the 35 x 7.5 mm DIN rail A (A-B pt. no.
199-DR1).
3. Rotate the module onto the DIN rail with the top of the rail hooked
under the lip on the rear of the module.
4. Press down to lock the module on the DIN rail.
1797-CEC
42642
A
A
41377