Rockwell Automation 2711E-ND7 Installing the PanelView Serial Firmware Upgrade Utility - Manual (Page 2)

Installing the PanelView
t
Serial Firmware Upgrade Utility 2
6. In the registration window, enter your user name, company name,
and serial number. You can obtain registration information from
the software registration card that is in your PanelBuilder 1400e
package (A-B Catalog Number 2711E-ND1). Choose Next.
7. In the confirmation window, verify the user information you have
entered. Select Yes to proceed or No to edit the user information.
8. In the Welcome dialog box for the Serial Firmware Upgrade
Utility, it recommends that you close all open Windows
applications. If you have done that, choose Next.
9. Choose the drive and directory in which the SFU32 will be
installed. By default, this is C:\AB\PB1400E\SFU32. To change
the destination drive or directory, type the new drive and/or
directory in the Program Files field. Choose Next.
10. Choose the program folder (program group) in which you want to
install the SFU32 icons, which includes a Readme file icon, the
Upgrade Utility icon, and an Uninstall icon. By default, the icons
are installed in the PanelBuilder 1400e program folder. Choose
Next.
11. The setup utility shows a summary of the choices you made in the
preceding dialog boxes. To make any changes, choose the Back
button. Otherwise, choose Next to begin the installation.
Do not cancel the installation while it is in progress. If you want
to undo the installation, let the installation finish, and then use the
Uninstall Serial Firmware Upgrade Utility to remove all the
installed files and to update the registration.
12. When the installation is complete, remove the CD-ROM from the
drive.
The Serial Firmware Upgrade Utility Version 3 (SFU) software is
provided on CD-ROM. The software installation program creates a
directory on your hard drive for the Serial Firmware Upgrade Utility
and copies all necessary files to it. By default, the drive and directory
is C:\AB\PB1400e\SFU. You can change this default.
To install SFU:
1. Start Windows 95 or 3.x. If you’re already in Windows, close all
open Windows applications.
2. Place the CD-ROM in the drive.
Installing SFU from
“PanelBuilder 1400e”
(2711–ND1) CD-ROM onto
Windows 95 or
Windows 3.x