Rockwell Automation 2711E-ND7 Installing the PanelView Serial Firmware Upgrade Utility - Manual (Page 4)

Installing the PanelView
t
Serial Firmware Upgrade Utility 4
To complete the setup, enter any required information when
prompted.
Do not cancel the installation while it is in progress. If you want
to cancel the installation, let the installation finish, and then use
the Uninstall Serial Firmware Upgrade Utility to remove all the
installed files.
10. When the installation is complete, remove the CD-ROM from the
drive.
For information on how to start and exit from the Serial Firmware
Upgrade Utility Version 3 (SFU), see Appendix D in the PanelView
1000e and 1400e Operator Terminals User Manual (A-B Publication
Number 2711E-821).
The Serial Firmware Upgrade Utility Version 5 (SFU32) software is
provided on CD.
The software installation program creates a directory on your hard
drive for the SFU32 and copies all necessary files to it. By default,
the drive and directory is C:\AB\PB1400E\SFU32. You can change
this default.
To install SFU32:
1. Start Windows 2000(SP2)/NT/95. If you’re already in Windows,
close all open Windows applications.
2. Insert the CD in the drive.
3. Browse the CD for file “SFU_V5”. Browse Disk 1. Run
“SETUP.exe”.
4. Close all applications, and then choose Next. The Serial
Firmware Upgrade Utility Installation Program runs
automatically.
5. Enter the required information.
6. Choose the drive and directory in which the SFU32 will be
installed. By default, this is C:\AB\PB1400E\SFU32. To change
the destination drive or directory, type the new drive and/or
directory in the Program Files field. Choose Next.
7. Choose the program folder (program group) in which you want to
install the SFU32 icons, which includes a Readme file icon, the
Upgrade Utility icon, and an Uninstall icon. By default, the icons
are installed in the PanelBuilder 1400e program folder. Choose
Next.
8. Follow the setup instructions as they appear on your screen.
Installing SFU32 from the
“PanelBuilder 1400e
Transfer Utilities” CD onto
Windows 2000(SP2)/NT/95