Installing additional communication drivers – Rockwell Automation 2711E-ND7 Installing the PanelView Serial Firmware Upgrade Utility User Manual
Page 6
Installing the PanelView
t
Serial Firmware Upgrade Utility
6
Do not cancel the installation while it is in progress. If you want
to undo the installation, let the installation finish, then use the
Uninstall Serial Firmware Upgrade Utility to remove all the
installed files and to update the registration.
9. When the installation is complete, remove the CD from the drive.
The Serial Firmware Upgrade Utility supports additional
communication drivers besides the core drivers (Remote I/O, DH+,
ControlNet KTCS, and ControlNet KTCX). If an additional driver is
required, a disk that contains an install and uninstall program is
supplied in the kit for that network driver.
To install an additional driver:
1. Close the Serial Firmware Upgrade Utility.
2. Place the disk in the drive.
3. On Windows NT or Windows 95, click the Start button and then
choose Run.
On Windows 3.x, choose Run from the File menu of Program
Manager or File Manager.
4. In the Run window, type:
a:setup
or
b:setup
5. Follow the installation instructions as they appear on your screen.
When the registration window appears, enter the registration
information that is provided in the kit for the network driver.
6. When the installation is complete, remove the disk from the
drive.
7. Start the Serial Firmware Upgrade Utility. The new driver is
displayed in the list of drivers.
This section describes how to start the Serial Firmware Upgrade
Utility Version 5 (SFU32) from Windows NT or Windows 95. The
functionality of the serial firmware upgrade utility is the same for
Windows NT and Windows 95.
To start the Serial Firmware Upgrade Utility from Windows NT or
Windows 95:
1. Click the Start button on the taskbar.
2. Choose Programs, and then choose PanelBuilder 1400e, or the
folder you specified when you installed the program.
3. Choose Serial Firmware Upgrade Utility.
Installing Additional
Communication Drivers
Starting the PanelView
Serial Firmware Upgrade
Utility