Rockwell Automation 9904-PCIC ControlNet 9904-PCIC Communications Card I.I. - Manual (Page 6)

6 ControlNet PCI Communication Interface Card
9904-IN002A-US-P - March 2000
Insert the Card
To insert the card inside the computer:
1. Follow the card handling instructions on page 4.
2. Insert the card into the edge connector and tighten the expansion slot
screw.
3. Turn on the computer to be certain that it comes up correctly.
4. Replace the computer’s cover (when the computer boots up correctly).
If the computer: then:
powers up go to step 4
hangs up • you probably have a memory or I/O conflict
• you should remove all other cards and try again
If you continue to experience difficulty, contact a
representative where you purchased this product.