Rockwell Automation 9904-PCIC ControlNet 9904-PCIC Communications Card I.I. - Manual (Page 7)

ControlNet PCI Communication Interface Card 7
9904-IN002A-US-P - March 2000
Connect the Card
After you have installed the card, you can connect it:
– to a device already connected to the ControlNet network (page 8)
– directly to a ControlNet network, which requires a tap (page 11)
Figure 1 describes the 9904-PCIC card connectors and indicators.
Figure 1 9904-PCIC card
A
B
Network Access Port (NAP)
RJ-45 connector for connecting
programming terminals to devices
on a ControlNet network
Channel A
BNC connectors for connecting directly to
ControlNet network
Channel B
Do not connect more than one
ControlNet network to this card.
Redundant media
BNC connectors
Diagnostic status
indicators
!
!
!
!
ControlNet