Rockwell Automation 1799-D16U16BL 16 Input/16 Output Discrete Embedded I/O - Manual (Page 11)

16 Input/16 Output Digital Embedded I/O Boards 11
Publication 1799-IN004F-EN-P - September 2008
The DeviceNet wire insulation colors are shown below.
Auxiliary Power Specifications
P1 1799-D16U16V and -D16U16VL I/O Connector
Pin Signal Pin Signal Pin Signal
8 Common Return 25 Input 11 41 Input 10
9 Output 4 26 Input 9 42 Input 8
10 +24V dc-GRP 0 27 Input 14 43 Common In GRP 1
11 Output 5 28 Input 12 44 Input 13
12 Output 7 29 Output 6 45 Input 15
13 Output 0 30 Not Used 46 Not Used
14 Output 1 31 Not Used 47 Not Used
15 +24V dc-GRP 0 32 Not Used 48 Not Used
16 Output 2 33 Not Used 49 Not Used
17 Output 3 50 Not Used
P3 DeviceNet Connector
Pin Insulation Colors
1 Black
2 Blue
3 Shield
4 White
5 Red
ATTENTION
To comply with the CE Low Voltage Directive (LVD), this equipment and all connected I/O
must be powered from a source compliant with the following:
•
Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
To comply with UL restrictions, this equipment and all connected I/O must be powered
from a source compliant with the following:
•
10...30V dc Class 2 Power Supply or a 10...30V dc UL Listed or Recognized Power
Supply with isolated outputs limited to 200VA in each ungrounded output line. This
equipment and its power source must be mounted in a suitable enclosure with
proper spacings maintained.