Rockwell Automation FactoryTalk Historian Classic for Batch User Guide - Manual (Page 54)

Chapter 4 Analyzing Reports
2. In the Report Object Name box, type a unique name for the
Batch Analysis Chart object.
3. In the Batch Unique ID box, type the Unique ID of the batch
to be compared.
4. Click OK. The object is now configured for viewing.
5. Save the report.
6. Switch from Design mode to Preview mode and run the report
to display the Batch Analysis Chart.
The Batch Summary Report displays summary information based on
the selected batch. By default, the report includes the following:
• Master recipe, control recipe, unit procedure, operation, and
batch summary information.
• Batch alarms.
• Operator prompts and comments.
• Detailed unit procedure information.
• Detailed parameter and report information.
• Time-series trend.
NOTE
The tags included on the time-series trend must be specified in
Design mode. To change the tags to be compared at runtime,
you must return to Design mode and change the tag IDs in the
Properties dialog box of the time-series trend object.
Batch Summary Report
54 Rockwell Automation Publication BHIST-UM011A-EN-E-June 2014