Rockwell Automation FactoryTalk Historian Classic for Batch User Guide - Manual (Page 55)

Analyzing Reports Chapter 4
When you switch from Design mode to Preview mode, the Batch
Summary report displays information based on the Batch ID
specified in the Report Configuration Selections. From the Batch
ID|Unique ID|Area list, you can select the batch you want to see.
The Batch Summary Report contains twelve objects. Most are text
objects that show data in columns. These objects can be used
without modification, or you can configure them using the
Properties dialog boxes in Design mode. See the
FactoryTalk
Historian Classic User Guide for more information on changing
chart component properties.
Object Type Description
Master Recipe Information Text
Shows Recipe Name, Recipe Type, Product Description, Product Code, Area Model File name,
Verification Time, and Version number for the recipe that was run with the selected Batch ID or
Unique ID and Area.
Control Recipe Information Text Shows the BatchID, Start Time, and End Time of the control recipe for the batch.
Unit Procedure Information Text
Shows the Name, Start Time, and End Time of each Unit Procedure that ran under the selected
Unique ID.
Operation Information Text
Shows the Name, Start Time, and End Time of each Operation that ran under the selected
Unique ID.
Batch Summary Information Text Provides Phase information, including Process Cell, Start Time, and End Time for each Phase in
Selecting Data To Display On
the Batch Summary Report
Batch Summary Report
Objects
Rockwell Automation Publication BHIST-UM011A-EN-E-June 2014 55