Batch compare report objects, Batch equipment utilization report – Rockwell Automation FactoryTalk Historian Classic for Batch User Guide User Manual
Page 57
Analyzing Reports Chapter 4
or Ctrl keys to make multiple selections in this list. Click a
highlighted batch to deselect it.
The Batch Compare Report contains four objects, including the
Batch Comparison Summary, and three time-series trend charts.
The default Batch Comparison Summary and trend objects can be
used without modification.
Object
Type
Description
Batch Comparison Summary Text
Shows summary information for each batch being compared including LotIDs, BatchIDs,
Equipment on which the batches were run, and Start Time, End Time, and Duration of the batch
use of the listed equipment.
Batch Trends
Graphic Trend of a continuous reporting tag, such as temperature, pressure, flow rate, or other. Three
Batch Trend objects are displayed.
The Batch Equipment Utilization report shows a summary of
equipment utilized in a specified unit or process cell. The
information displayed includes the following:
Batch Compare Report
Objects
Batch Equipment Utilization
Report
Rockwell Automation Publication BHIST-UM011A-EN-E-June 2014
57