Rockwell Automation 2198-CAPMOD-1300 Kinetix 5500 Capacitor Module Installation Instructions - Manual

Installation Instructions
Kinetix 5500 Capacitor Module
Catalog Number 2198-CAPMOD-1300
About the Kinetix 5500 Capacitor Module
The Kinetix 5500 capacitor module provides 1360 μF capacitance for applications where the
Kinetix 5500 internal shunt module capacity is exceeded. The capacitor module can be used
alone or in combination with a Bulletin 2097 external shunt module for applications with
excessive regenerative energy.
The Kinetix 5500 capacitor module is an option for Bulletin 2198 servo drive configurations
with 200V or 400V-class operation.
Refer to the Kinetix 5500 Servo Drives User Manual, publication 2198-UM001 , for detailed
information on wiring, applying power, troubleshooting, and integration with ControlLogix® or
CompactLogix™ controllers.
Topic Page
About the Kinetix 5500 Capacitor Module 1
Important User Information 2
Before You Begin 3
Install the Kinetix 5500 Capacitor Module 3
Connector Data 5
Wiring Requirements 6
Additional Resources 7
IMPORTANT Use the 2198-CAPMOD-1300 capacitor module in Kinetix 5500 drive configurations where
DC bus power is shared through the shared-bus connection system. You cannot use the
capacitor module in configurations where only AC input power is shared.