Rockwell Automation 2100H-UNTLKx Replacing the Unit Interlock for CENTERLINE 2100 Motor Control Centers - Manual

Installation Instructions
Replacing the Unit Interlock for CENTERLINE
2100 Motor Control Centers
Catalog Numbers 2100H-UNTLK1, 2100H-UNTLK2,
2100H-UNTLK3, 2100H-UNTLK4, 2100H-UNTLK5, 2100H-UNTLK6
About This Publication This document provides information on how to remove and install the
unit interlock on the following units.
Refer to page 2 for an illustration of the interlocks.
Topic Page
About This Publication 1
Replacing the Unit Interlock 2
Remove the Interlock from the Unit 2
Install the Interlock in the Unit 5
Additional Resources 7
Interlock with Corresponding Units
Kit Cat. No. Used with Unit
2100H-UNTLK1 Plug-in units with 200 A disconnect switch
2100H-UNTLK2 Plug-in units with 400 A disconnect switch
2100H-UNTLK3 Plug-in units with 250 A or 400 A frame circuit breaker and single
stab assembly
2100H-UNTLK4 Plug-in units with 250 A or 400 A frame circuit breaker and
dual-power stab assembly
2100H-UNTLK5 Plug-in units with 600 A frame circuit breaker
2100H-UNTLK6 Plug-in units with 400 A LA-tripac circuit breaker