Rockwell Automation 2100H-UNTLKx Replacing the Unit Interlock for CENTERLINE 2100 Motor Control Centers - Manual (Page 3)

Publication 2100-IN068A-EN-P - July 2009
Replacing the Unit Interlock for CENTERLINE 2100 Motor Control Centers 3
2. Remove the unit from the MCC.
3. Loosen the taptight on the side of the unit, if used, to be able to
remove the interlock from the unit.
A taptight is not required for units that use interlock kit numbers
2100H-UNTLK3 and 2100H-UNTLK4.
4. Compress the tab on the interlock to make the tab flush with the
rest of the interlock.
ATTENTION
Plug-in MCC units may be heavy or awkward to handle. Use an
assistant or a platform lift device if necessary to help you handle the
unit.
Taptight Location
(if used)
Interlock Tab
Interlock