Rockwell Automation 2100H-UNTLKx Replacing the Unit Interlock for CENTERLINE 2100 Motor Control Centers - Manual (Page 4)

Publication 2100-IN068A-EN-P - July 2009
4 Replacing the Unit Interlock for CENTERLINE 2100 Motor Control Centers
5. Slide the interlock up until the bottom of the interlock can be
removed from the slot in the side of the operator handle
assembly.
6. Tilt the bottom of the interlock towards the center of the unit.
7. If you have kit numbers 2100H-UNTLK3 and 2100H-UNTLK4,
pull the interlock through the slot on the top of the unit as
shown. For the other units, pull the interlock down to remove it
from the unit.
Slot
Interlock