Rockwell Automation 2100H-UNTLKx Replacing the Unit Interlock for CENTERLINE 2100 Motor Control Centers - Manual (Page 7)

Publication 2100-IN068A-EN-P - July 2009
Replacing the Unit Interlock for CENTERLINE 2100 Motor Control Centers 7
8. Install the unit into the MCC.
Refer to the CENTERLINE 2100 Low Voltage Motor Control
Centers Instruction Manual, publication
2100-IN012 , for
information regarding installing units with vertical operating
handles.
9. Apply power to the MCC.
Refer to the CENTERLINE 2100 Low Voltage Motor Control
Centers Instruction Manual, publication
2100-IN012 , for
information for applying power.
Additional Resources These documents contain additional information concerning MCC
products.
You can view or download publications at
http://literature.rockwellautomation.com . To order paper copies of
technical documentation, contact your local Rockwell Automation
distributor or sales representative.
ATTENTION
To prevent personal injury or damage to equipment, make sure the
unit handle is in the OFF/O position before installing the unit. Serious
injury or death can result from working on energized MCCs.
ATTENTION
Plug-in MCC units may be heavy or awkward to handle. Use an
assistant or a platform lift device if necessary to help you handle the
unit.
Resource Description
CENTERLINE 2100 Low Voltage Motor
Control Centers Instruction Manual,
publication
2100-IN012
Provides information on installing and using
the CENTERLINE 2100 Motor Control
Center.
CENTERLINE 2100 Motor Control Center
(MCC) Units with Vertical Operating
Handles Installation Instructions,
publication
2100-IN014
Provides information on installing the
CENTERLINE 2100 Motor Control Center
with vertical operating handles.