Connect to the network, Replace the battery, Ship or transport the product – Rockwell Automation 6155R 200R VersaView Industrial Non-display Computers User Manual
Page 19
VersaView Industrial Non-display Computers 19
Publication 6155R-IN001I-EN-P - July 2007
Connect to the Network
The computer connects to the Ethernet network by using CAT5 or CAT5E
twisted-pair Ethernet cabling with RJ45 connectors.
Replace the Battery
The computers use nonvolatile memory that requires a battery to retain system
information when power is removed. The lithium battery is in a battery holder on
the computer’s CPU board.
• For the VersaView 700R and 1400R computer, replace this battery as needed
with a Panasonic battery, part number CR2032, or equivalent.
• For the VersaView 200R computer, replace the battery as needed with a
specially-packaged replacement part from Allen-Bradley.
Ship or Transport the Product
If you need to ship the product via common carrier or otherwise transport it to
another location, you must first uninstall the product and place it in its original
packing material.
IMPORTANT
To prevent performance degradation of Ethernet communication, do not subject
the computer or cables to extreme radiated or conducted high-frequency noise.
Proper cable routing and power conditioning is required for reliable Ethernet
communication in industrial environments. Rockwell Automation recommends
that you route all Ethernet cabling through dedicated metal conduits. Installing
ferrite bead filters at the cable ends may also improve reliability.
WARNING
To avoid the danger of explosion, replace the battery with only the
recommended equivalent or Allen-Bradley replacement part. Dispose of used
batteries according to the manufacturer’s instructions.
ATTENTION
Do not ship or transport the product when it is installed in a machine, panel, or
rack. Doing so may cause damage to the product. You must uninstall the
product and place it in its original packing material before shipping. Rockwell
Automation is not responsible for damage incurred to a product that is shipped
or transported while installed in a machine, panel, or rack.