Rockwell Automation 2708-NAG Application Generation Software - Manual (Page 14)

Chapter 3
Using Application Generator
3 – 4
When F2 is pressed the Main Operations Menu is replaced with the options
shown in Figure 3.2.
Figure 3.2
AG Display to Screen Menu
In options F2 , F3 , and F7–F9 , you are prompted to enter the text or the
variable name. When you provide a name it is shown on the workstation
display in the upper right corner of the CRT. You then use the arrow keys to
position it, and the plus and minus keys to choose the size of the field. When
both are to your satisfaction, press
[ENTER] to write the statement in the
program.
In options F4 and F5 , the time or date is displayed on the screen representing
the workstation display. You use the arrow keys to move the time/date to the
desired position, then press
[ENTER] to write the statement.
Option F6 clears the workstation’s display.
Option F1 0 offers various clear functions.
Figure 3.3
AG More Display to Screen Menu