Rockwell Automation 2708-NAG Application Generation Software User Manual
Page 25
Chapter 3
Using Application Generator
3 – 15
Figure 3.16
AG Other Operations Menu
F2
– Beep: When the
F2 – BEEP
option is chosen the following sub-menu
appears:
Figure 3.17
AG Sound Menu
Beep: The tone is set to 1000 Hz for 0.25 (1/4) of a second.
Chirp : The tone is set to 2000 Hz for 0.15 of a second.
Boop: The tone is set to 300 Hz for 1 second.
Key in.. .: The workstation can produce sounds in the range of 100 to 3000
Hz. A low sounding tone is around 200 Hz. A high pitched tone is above
2000 Hz.
The loudness of the sound will vary depending on the frequency. Your PC
will only produce an approximation of the actual sound produced by the
workstation.
F3
– Pause: You can pause your program for any number of seconds. Use
this to leave a prompt on the display long enough for the user to read it.