F5 – send to host or device – Rockwell Automation 2708-NAG Application Generation Software User Manual
Page 20
![background image](/manuals/580792/20/background.png)
Chapter 3
Using Application Generator
3 – 10
Figure 3.9
AG Read Laser/Device Menu
In the options
F2
through
F6
, you are prompted on the next to the last line:
‘Read into Variable Name : “.
IN
is the default variable. Press
[ENTER]
to
store the operation.
The
F7
option is appended to the Read statement and replaces any previous
timeout.
F5
– Send To Host Or Device
The
F5 – SEND TO HOST OR DEVICE
option is used to send data to the
host, send data out a communications port, or to control the workstation LED
indicators. When
F5
is pressed the Main Operations Menu is replaced with
these options:
Figure 3.10
AG Send to Host/Devices Menu
In the
F2
–
SEND VARIABLE INDIRECTLY TO HOST
option, the record
sent is held in the workstation queue memory until the Host polls. The
number of records sent when the Host if offline is dependent of the amount
of memory in the workstation.