Rockwell Automation 2727-TRSP1xx MobileView Tablet Power Kit Installation Instructions - Manual (Page 3)

3 Publication 2727-IN007B-MU-P
Installation Instructions
English Section MobileView Tablet Power Kit
(Cat. No. 2727-TRSP1xx)
Introduction The MobileView Tablet Power Kit accommodates a single Lithium-Ion
battery and charges it in approximately four hours. The LED display
indicates charge status.
Safety Instructions Before using your MobileView Tablet Power Kit, read all the
instructions and cautionary markings on the battery charger, the
battery and any product that uses the battery.
•
Do not expose the charger to rain, snow or direct sunlight.
•
The charger should be used at room temperature +20°C to
+25°C (+68°F to +77°F)
•
The charger should be placed in a well ventilated area free from
foreign matter.
•
Unplug the charger from the outlet before attempting to clean or
change adapters in order to reduce risk of electrical shock.
•
Do not disassemble, incinerate, modify or short circuit the
batteries, charger or related components.
WARNING
!
To reduce risk of injury, use this charger only with
authorized adapters and power supplies. Other
adapters or equipment may cause personal injury or
damage to equipment.