Rockwell Automation 2727-TRSP1xx MobileView Tablet Power Kit Installation Instructions - Manual (Page 8)

Publication 2727-IN007B-MU-P
8 MobileView Tablet Power Kit
Specifications
Charge indicator continues
to flash after battery
insertion. Over discharged battery.
Defective battery.
Hot battery.
Leave battery in charger for
15 minutes then reinsert.
Replace battery.
Let battery cool.
Charger will not go into
charge. Dirty contacts/connection.
Defective battery.
Defective charger. Clean contacts.
Replace battery.
Replace adapter.
Battery not getting full
charge. Dirty contacts/connection.
Defective battery. Clean contacts.
Replace battery.
Table 2 Troubleshooting
Symptom/Situation
(Fault Indication) Probable Cause Corrective
Action/Solution
Table 3 Specifications
Dimensions 1.5 in x 3.2 in x 5.1 in
(3.8 cm x 8 cm x 13 cm)
Weight 0.4 lbs (180 g)
Input voltage 15V, 2A
Charge Temperature 5°C to 40°C (41°F to 104°F)
25°C (77°F) is Optimal Charge Temperature
Certification UL/CSA DC wall supply
TIP
For indoor use only.