Rockwell Automation 2727-TRSP1xx MobileView Tablet Power Kit Installation Instructions - Manual (Page 5)

Publication 2727-IN007B-MU-P
MobileView Tablet Power Kit 5
Power Cord Connection Before connecting the AC power cord make sure to connect the
power supply to the charger. The charger must be grounded to reduce
the risk of electrical shock. It has a power cord with an
equipment-grounding conductor and a grounding plug. This plug
must be inserted into an outlet that is properly installed and grounded
in compliance with all local codes and ordinances.
The power supply uses a nominal 115 volt or 230 volt circuit with a
power cord socket that fits one of the adapters shown below.
WARNING
!
Never alter an AC cord or its plug. If it does not fit
into your outlet, have a proper outlet installed by a
qualified electrician. An improper connection can
cause an electrical shock.
North American Standard Adapter Italian Standard Adapter
United Kingdom Standard Adapter European Standard Adapter
Power Cord Socket
Power Supply